Scott Drakes 1964-66 Mustang Turn Signal Lever is a perfect copy of the original. Featuring fine chrome plating to replace those rusted or tweaked originals.
…
This plastic socket is used to hold the wire terminal ends firmly in place on the switch and is almost always brittle or broken when you go to replace it.
Installation is simple; carefully break apart the old socket with pliers…
This pair of tail light housing extension wires features the correctly colored green and orange pigtail for the left side and the blue and orange pigtail for the right.
…
Reproduction Of Original When replacing your sealed beam, check the socket for cracks or corrosion. If the socket is bad, replace it without replacing the entire wiring harness. This headlight bulb pigtail includes the socket & wires…
These are white nylon wiring harness retainers that are used on various years and models of Ford, Lincoln and Mercury vehicles. These retainers are 3/8" wide x 1-7/16" long and have a 9/32" diameter x 7/16" long stem. They tape to the…
Includes all loom straps, anchors, and clips necessary to correctly install wiring looms. These are excellent reproduction that feature excellent fit with concourse appearance. 25 piece kit
…
Also Fits 1932 Passenger Car
Also fits a 1928-31 truck. This is a black plastic insert that fits into the base of the headlight where the wires come together, preventing them from shorting out.
…
Includes all loom straps, anchors, and clips necessary to correctly install wiring looms. These are excellent reproduction that feature excellent fit with concourse appearance. 25 piece kit
…
Show Quality Pressure die-cast zinc bezels, with excellent triple chrome plating and black details are Concours quality. Constructed from pressure die-cast zinc, these bezels feature a triple chrome-plating finish and black details. These…
Reproduction Of Original When replacing your rusty or damaged fuel or brake lines, be sure to finish the job by replacing the mounting clips on the frame. This clip is reproduced just like the factory part with the correct phosphate…
This authentic copy of the original socket was used on T's with a generator. It is a double contact socket and attaches to the back of the headlight bucket.
…
Replacement Tape 1.25 Wide x 100 Ft. Long Adhesive Tape Makes Installation Easier This Corvette replacement wiring harness tape adhesive has been manufactured to meet or exceed factory specifications and performance. You will find the fit…